Brasatura alluminio: leghe alluminio e zinco-alluminio
Aluminium-silicon and aluminium-zinc alloys for aluminium low temperature brazing. Aluminium-zinc alloys are fitted also for copper-aluminium and steel-aluminium brazing. These alloys are available in different formats such as wires and roads, foils and sheets, flux cored wires, rods and rings, preformed, powder and pastes. Using fluxed cored wires it’s not needed the flux residues removal after brazing.
Aluminium alloys are commonly used in refrigeration and conditioning fields, automotive, repairing and manufacturing of exchargers, manifolds, condersers, radiators, general mechanics and hobby.
Discover our aluminium alloys catalogue and download the data sheet.
Model
Composition
Working temperature (° C)
Specific gravity (g/cm3)
Standard
Details
ALUMINIUM SILICON
AlSi5
Alloy can be used for brazing aluminum, flame, furnace and induction processes, with the appropriate flux. Excellent fluidity and penetration into the joint. Used in the brazing of aluminum heat exchangers, conden- sers, air conditioning and automotive.
Si 5% Al 9%
575-630
-
ISO 17672 AL 105
EN 1044 AL 101
AlSi12
Alloy can be used for brazing aluminum, flame, furnace and induction processes, with the appropriate flux. Excellent fluidity and penetration into the joint. Used in the brazing of aluminum heat exchangers, conden- sers, air conditioning and automotive.
Si 12% Al 88%
575-585
-
ISO 17672 AL 112
EN 1044 AL 104
AWS A5.8 BAlSi-4
ALUMINIUM ZINC
AlZn78
Alloy used for the brazing of aluminum-copper, aluminum-brass, alumi- num-steel, using a specific flux. It’s ‘primarily used in heat exchangers, air-conditioning and automotive.
Al 22% Zn 78%
440-470
-
-
AlZn98
Alloy used for the brazing of aluminum-copper, aluminum-brass, alumi- num-steel, using a specific flux. It’s ‘primarily used in heat exchangers, air-conditioning and automotive.
Al 2% Zn 98%
380-405
-
-
Disossidanti per alluminio
Available formats
Tutte le nostre leghe dell’alluminio sono disponibili in diversi formati come fili e barrette, leghe alluminio in nastri e laminati, anelli animati, anelli e preformati, polveri e paste.
